Modeling of functionally graded piezoelectric ultrasonic transducers

The application of functionally graded material (FGM) concept to piezoelectric transducers allows the design of composite transducers without interfaces, due to the continuous change of property values. Thus, large improvements can be achieved, as reduction of stress concentration, increasing of bonding strength, and bandwidth. This work proposes to design and to model FGM piezoelectric transducers and to compare their performance with non-FGM ones. Analytical and finite element (FE) modeling of FGM piezoelectric transducers radiating a plane pressure wave in fluid medium are developed and their results are compared. The ANSYS software is used for the FE modeling. The analytical model is based on FGM-equivalent acoustic transmission-line model, which is implemented using MATLAB software. Two cases are considered: (i) the transducer emits a pressure wave in water and it is composed of a graded piezoceramic disk, and backing and matching layers made of homogeneous materials; (ii) the transducer has no backing and matching layer; in this case, no external load is simulated. Time and frequency pressure responses are obtained through a transient analysis. The material properties are graded along thickness direction. Linear and exponential gradation functions are implemented to illustrate the influence of gradation on the transducer pressure response, electrical impedance, and resonance frequencies.     

Causal groups of space-time

The present paper is concerned with a finite dimensional space, considered as a real ordered linear space, directed with respect to a partial ordering relation (causal relation) in which a given reflexion (called temporal inversion) is antiisotone and the positive cone is closed in the euclidean topology.A generalized Zeeman theorem [1] is obtained, which states that the causal group relative to the causal relation is a subgroup of the affine group ofM.     

Traces of convex domains

Diederich and Ohsawa proved that in there exists a locally hyperconvex, Stein open subset which is not hyperconvex. In this paper we generalize their results.

     

Characterization and thermal stability study of efavirenz and solid dispersion with PVPVA 64 by means of thermal analysis and pyrolysis coupled with GC/MS

Journal of Thermal Analysis and Calorimetry - The acquired immunodeficiency syndrome remains a major problem in worldwide public health and its antiretroviral treatment therapy combines at least...     

On the Existence of Tree Backbones that Realize the Chromatic Number on a Backbone Coloring

A proper k‐coloring of a graph is a function such that , for every . The chromatic number is the minimum k such that there exists a proper k‐coloring of G. Given a spanning subgraph H of G, a q‐backbone k‐coloring of is a proper k‐coloring c of such that , for every edge . The q‐backbone chromatic number is the smallest k for which there exists a q‐backbone k‐coloring of . In this work, we show that every connected graph G has a spanning tree T such that , and that this value is the best possible. As a direct consequence, we get that every connected graph G has a spanning tree T for which , if , or , otherwise. Thus, by applying the Four Color Theorem, we have that every connected nonbipartite planar graph G has a spanning tree T such that . This settles a question by Wang, Bu, Montassier, and Raspaud (J Combin Optim 23(1) (2012), 79–93), and generalizes a number of previous partial results to their question.     

On a problem of Bremermann concerning Runge domains

In this paper we give an example of a bounded Stein domain in , with smooth boundary, which is not Runge and whose intersection with every complex line is simply connected.This work was supported by Marie Curie International Reintegration Grant no. 013023 and by the Romanian Ministry of Education and Research grant 2-CEx06-11-10/25.07.06.     

Chromium determination in pharmaceutical grade barium sulfate by solid sampling electrothermal atomic absorption spectrometry with Zeeman-effect background correction

A procedure for chromium (Cr) determination in pharmaceutical grade barium sulfate by direct solid sampling electrothermal atomic absorption spectrometry (DSS-ET AAS) with Zeeman-effect background correction was developed. Operational conditions for the proposed procedure and the use of citric acid, ammonium phosphate, palladium and magnesium nitrate as chemical modifiers were evaluated. Pyrolysis and atomization temperatures were set at 1500 and 2400 °C, respectively and the use of matrix modifiers did not improve these conditions. Graphite platform presented high degradation rate, but minima changes were observed in the sensitivity or signal profile. Samples (0.3-1 mg) were weighted and introduced into the furnace using a manual solid sampling system. The linear concentration range of the calibration curve was from 100 to 1800 pg (R² > 0.995). The characteristic mass was 7.7 pg and the limit of detection was 2.4 pg. Chromium concentration in commercial samples ranged from 0.45 to 1.06 μg g⁻¹ and these results were confirmed by standard addition method. The mean reproducibility was 12% (n = 20 in a 3-day period) and repeatability was less than 9%. Results obtained using inductively coupled plasma optical emission spectrometry and conventional electrothermal atomic absorption spectrometry after extraction with HNO₃ were around 20% lower than those obtained by the proposed procedure. It was assumed that the low results were due to incomplete extraction even using hard conditions related to temperature and pressure. The proposed procedure by DSS-ET AAS provided some advantages related to recommended pharmacopoeias methodology, as lower risks of contamination and analyte losses, higher specificity, accuracy and sensitivity, no toxic or unstable reagents are required, and calibration with aqueous standards was feasible.     

Total synthesis of (−)-cleistenolide and formal synthesis of herbarumin I via a diastereoselective modulable allylation

A modulable tin based allylation method for the synthesis of 1,2,3-triols is described. The optimization of the reaction was aided by ¹H and ¹¹⁹Sn low temperature NMR spectroscopic investigations, which support the formation of two cyclic intermediates after transmetallation. Depending on the nature of the Lewis acid, either syn/anti or anti/syn configured triols could be obtained with good stereocontrol. To demonstrate the value of this methodology and the resulting scaffolds, they were used to install the signature triol motifs of (?)-cleistenolide and of herbarumin I.     

Solid sampling coupled to flame furnace atomic absorption spectrometry for Mn and Ni determination in petroleum coke

A solid sampling flame furnace atomic absorption spectrometry (SS-FF-AAS) system was developed for Mn and Ni determination in petroleum coke. The proposed system for solid sampling was a quartz cell with two perpendicular tubes (T-shaped tubes), positioned above the burner. Manganese and Ni determination was made using an atomic absorption spectrometer with deuterium background corrector, air-acetylene flame and a single slit burner. Powdered samples of coke were introduced as pellets (up to 62 mg) into the quartz cell with a movable hollow quartz piston. When the sample pellet reached the end of quartz cell (T-connection), in the presence of a constant oxygen flow, it quickly burned and the combustion products were transferred to the upper slit tube where the atomic absorption process occurs. Calibration was possible using aqueous reference solutions applied directly on high purity graphite pellets. Results obtained for Mn and Ni using the proposed SS-FF-AAS system were compared to those obtained by inductively coupled plasma optical emission spectrometry (ICP OES) and inductively coupled plasma mass spectrometry (ICP-MS) after sample decomposition by high pressure microwave assisted acid digestion and also by microwave induced combustion. Agreement better than 96% was obtained for both methods employing a previous step of sample digestion (ICP OES and ICP-MS) and by SS-FF-AAS. Accuracy was evaluated using certified reference materials and also recovery tests. The relative standard deviation was lower than 9% for both analytes. The characteristic mass was 18.3 and 14.7 ng and the limit of detection was 0.6 and 0.8 µg g^− 1 for Mn and Ni, respectively. The proposed SS-FF-AAS system can be applied for Mn and Ni determination in petroleum coke, combining a relatively high sample throughput (9 determinations per h), and a suitable precision and accuracy.     

Efficient Heck arylations of cyclic and acyclic acrylate derivatives using arenediazonium tetrafluoroborates. A new synthesis of the antidepressant drug (+/-)-paroxetine

[reaction: see text] The Heck arylation of acyclic- and cyclic-substituted acrylates using several arenediazonium tetrafluoroborates was investigated. Arylations were carried out under aerobic, ligand-free conditions to provide the corresponding substituted acrylates in moderate to high isolated yields. Heck arylations were usually completed in less than 2 h in refluxing methanol. The aza-endocyclic acrylate derivative 11a was converted into the antidepressant drug (+/-)-paroxetine in a concise new route in good overall yield.